Search results

The AIR pump lower bolt won't come out unless the pulley is removed. Just something else to throw out.....front stabilizer link bolt.

Is that 7/16"? Motor mount? 3/8"? AC compressor lower pivot bolt?? Trans crossmember to frame?

I have noticed on my Vettes with original gymkhana springs(that don't have the big arch like standard springs)that when it's up on jack stands and the suspension is hanging there is NO tension on the spring bolts. I actually had to push DOWN on the spring ends to get the bolts out because of the...

And sold these two:thumb Still have the NOS at the top of the thread available.

SOLD...

No instructions? Aftermarket you pretty much need to use what came with the antenna, IGNORE the factory wires. OR......Factory antenna uses a relay about midway between the radio and antenna. That relay changes the polarity of the wires going to the FACTORY antenna. Uses only TWO of the three...

Added 2 antennas I've restored/repaired:thumb

Crystaldream, I got a lead on a original style AM/FM/CB antenna. This other guy IS in this to make money so no idea what he'd charge. And I'm kinda talking him into doing this. He's sitting on all his stuff til the market improves. Email me your real name and email address, I'll pass it on to...

I'll keep an eye open for a CB unit, but they're rare! True, the CB antenna just gets one cable from the radio, but there's a second coil rolled up and taped to the mast tube on the CB antenna. Plus the load coil. Good luck! I'm going to ask another guy I know if he has one in his STOCKPILE of...

Either way, but my email is probably easier. I can make your CB ANTENNA operational again. Can't guarantee a 30 year old radio will still be good! They were pretty low tech! Do you know the condition of dad's Vette? Low mileage? Original? Make sure any antenna you send me is SIMILAR to the...

When I get them like this I usually get it fixed the day I receive it and back out in the next days mail. Send me a check when you have it back. USPS priority mail is the best for shipping. Again, I can make it work but I'm limited in how good I can make it look due to parts availability! I do...

I originally posted thinking you wanted to buy my AM/FM antenna for him but then reread your post. Was just implying he'd probably not want a non CB antenna. If it's just a matter of not going up and down the nylon repair cable is $30, return shipping usually about $10. Assuming that's all it...

Does he have the original that just doesn't work? I can fix it for you, parts and shipping is all I charge for.

ALL SOLD...

Strip the old paint off with regular paint stripper. I've used Zinsser Strip Fast. Don't sand it, you'll loose the texturing. Of course remove it from the car. You'll need to remove one side of the halo trim in order to swing it out. I repainted mine with FLAT rustoleum but from a quart with a...

Glad to help out.

Actually, that pic in shooter's post is mine. Don't know how it ended up there. I sold one of those to the original poster. Still have one left. $155 shipped.

This what you're looking for? I got a 17" and a 12". Pick one, just pay (international) shipping, unless it's just a couple bucks.

Did you remove the nuts holding the radio in place under the knobs? Most likely round with slots in them. Needle nose pliers will get them off.

Did the ones from Corvette Central come in a GM box? Were the clamps plastic like the originals or spring like steel?