Search results

Glenn when I put the constant 12 volts which doesn't work with the switched which does the radio works fine, so I figured the ground was ok. Bob

any fuse I put in blows as soon as the car is started, now the ABS light blinks.

the fusible link I replaced is the largest red wire in the harness that has 4 red wires.

when the starter went out and I caused it to arch the 25 amp fuse to the wipers blew. It's fine now, but I lost power to the seats,radio and door locks. I pulled the fender and found what I thought was a fusible link fried, the insulation was peeling off. I went to the parts store and bought a...

It didn't blow until I turned on the key, replaced with a 25 and it was fine. Problem still exist. I don't have 12 volts constant power through the 10 amp radio fuse. I checked the volts at the fuse and it is 9.5. the power seats,door locks don't work, but did before starter replacement.

right now I am so mad , I am about ready to push it out in the street and have a weenie roast. I put a 25 amp in and it didn't blow, But I still don"t have power to the seats,door locks or the constant 12 volts to the radio. Everything else works. I have looked at the FSM and I can't figure out...

I think I have found the fuse link that I fried. The replacement is a link where you can put a regular fuse in it. I hooked it up with a 10 amp fuse and it blew. what size of fuse would be equal to the link that runs the radio,power seats and the door locks. The red wire I spliced into was 5...

I have the same on my 69 GTX Conv. and the Vette. I have had the GTX with them since 1996. I believe the underwriter is American Modern home Insurance Company.

I am not sure the radio guy told me the truth. I am getting 12 volts to the radio and I tried grounding it to the battery, radio will not work. I tried 12 volts from the battery and it still doesn't work. have another radio on the way.

I took the radio in , it is fine. there were 3 wires coming from the starter The big black one that goes to the battery, the smaller black wire that goes to the solenoid.I have a 3rd wire with a fusable link that was hooked to the battery, I have tried it bothways on and off. I thought it...

I looked at it too, I pulled the radio out , the fuse was good in the radio. Hooked it up to 12 volts and grounded it. Didn't work. Good friend here in Tulsa owns Kenny's auto Acc. he said the Kenwood could still be bad even if the fuse is good. It's under warranty , so I will send it in...

found the fuse replaced and now the wipers work ,but still no radio??

The wipers worked fine as did the radio before starter replacement , now neither one work, the FSM shows a 25 amp fuse in the fuse block that delivers 12 volts to the radio head. Since i have neither one now,but did before the starter replacement, I think there is a connection, the problem is I...

looking at the FSM I see the link with the wiper motor, wipers don't work, But I don't see a fuse labeled wipers, is it one of the metal fuses?

I just thought of something, the fuse in the fuse block would blow before the radio fuse and the fuse block fuse is fine.

The radio fuse in the fuse block was good, I put another one in anyway. There is a fuse in the back of the radio, maybe it blew . Oh boy ,Out comes the radio

You can find R12 on Ebay, you will need a license to buy it. Oriellys auto parts has it here. Attach your gauges to the system, if I remember correctly your high side should be 2.5 times the ambient temp. Low side seemed to be 28-32, but I might have that confused with the older systems. That...

replaced the starter, works fine however now the radio gets no power at all. after market radio and was working fine before replacing the starter. all fuses are good. Any ideas??

I checked it as you suggested, then I reached down to wiggle the wires on the starter and then it sparked, the stud on the solenoid is loose causing the spark. If i remember there is a backing nut on that stud. Anyone remember?

got in the Vette this AM, inserted key,turned key, all power comes on ,I hear the relays clicking, the radio comes on, turned it further to engage starter and nothing, no click dead silence.Battery is good. No codes . got out the FSM I see there is a relay that comes from the CCM and goes to...