Search results

I found the problem. This may help others that have the same issue. First thank you Tom for the advice without it I would not have found the problem. Upon taking the rear all apart noting the shims and locations. After Tom's suggestion I looked further and took some measurements. Here's what I...

Is there any chance the movement can be caused by the rear end? I'm this far into it. If there is I will take out the rear end now vs after it is all back togather. Thank you for all your advice so far.

Thank you. I will look tonight. ok I took my rear end completely apart. I took the calipers, brake lines, shocks, strut rods, rear spring, and the trailing arm assemblies off. I noted where the shims go also. I took a lot of pics. I bought the car mainly restored. The bushings all look to be in...

Thanks Tom. Stuped question but what am I looking for. They are hidden where they attach in the body? I see shims and the bolt with the castle nut that holds them in place but how do you check them?

Help please. My corvette has developed what I call the sway. When at highway speeds and you accelerate or let off the throttle the car seems to sway. I have read some things on this. My u joints,brakes, rotors, calipers, are all brand new and tight. There is no play where shafts to the wheels...

I have checked into a few with no luck but will keep trying. It is a 1 year only part.

Does anyone know where to get a vacuum diaphram for the cruise control?

Anyone know where I can get a cruise control cable for my 77? Anyone know how to adjust the cable? The one I have seems to be a 1/4" short from reaching the carb stud, any ideas? And yes I have adjusted the cable at the bracket trying to get enough play to hook it up to the carb. The cable I...

thank you, Have you used either of these yourself?, both are a bit out my price range at this particular time. if there are any other options that are ok but a bit more price friendly I would be interested. I know you get what you pay for and quality counts. I may just have to save my pennies, lol.

Does anyone have experience with side pipes on a 77 Vette? brand ect, or suggestions as what are the best ones more for looks than noise.

Test post using 77coolvett's login. -Rob

I will thank You.

Can anyone recommend a radio repair center or someone who might restore vintage car radios? or has anyone upgraded their radio and has an original am fm 8 track they would be willing to sell?

Does anyone know how to un grease the steering valve? I replaced the pump and all was fine until I crawled under my car and decided to grease all the fittings, must have put to much grease in as the second I did that the steering became a bit harder to steer. The pump is working like it should...

Thank you for clarifying.

Control panel Here is my control panel.

Ok I found the bad ground, all the problems seem to be corrected. One thing I noticed is that when the a/c is set to max the blower motor automatically Runs on hi speed. Is this normal? Everything else works perfectly.

is anyone that has experience with electrical willing to talk to me on the phone as to this problem? Todd

dumb question, but where is the ground for the cluster?

I have the steering column out for better access, and the center gauge cluster removed. the only thing I changed from prior to disassembly is the bulbs and the headlight sw. the ground strap from the headlight sw to the cluster looks a bid oxidized but in good shape. the back of the cluster...