Mine was the same way but now it goes down everytime. All I did was turn the radio on and when the antenna was still up I pushed it down a little and then stopped and it popped back up automatically. Then I powered down the antenna and it went flush due to that. Havent had an issue since. Try...
Im back up and running thanks to you guys! :beer I got the mast in from antennamastsrus.com. I compared mine to the new one and I did break off 3" to 4" in the motor assembly but I found a good trick. I pulled the motor out of the rear light, I had someone hold it upside down shacking it while...
I was able to remove the mast afer a little wiggle it came right out. I then puched the antenna down and looked at the plastic long gear and it looks like its all there! The teeth looks a little worn out maybe thats why it wasnt grabbing the motors gears. I did order the mast so im going to try...
My antenna is stuck up all the time. U can hear the motor work when you shut off the radio or turn it back on and same with starting the car. How do you remove the mast? I uncrewed the nut on the top of the antenna from the fender and tried to pull the mask out but didnt slide out. is there...
I didnt pull out my tail light or look under the car. I thought it would be behind the panel in the back where you replace your tail light bulb but I guess not.
Hi Guys,
It appears that my power antenna went on my 2000 convertabile vette. I opened up the trunk and pulled off the carpet and noticed that you cant get to the antenna. It looks like its in the body of the rear fender, how do you get to it? :confused Anyone know how to replace the...
Hi
Im wondering what is the right way to go about cleaning my engine? I was gonna spray some cleaner then wash it off but I dont want to damage any electronics. Real dusty from the dirt roads. Any sugestions? anyone have a trick that works for them?
Thanks,
Bob. :beer
I had the same issue and the dealer replaced my hazard switch and never had the issue again. I heard they needed to remove the whole dash to get to the switch. Thank god it was under warranty or it would of been a lot out of my pocked due to the labor.
Hi guys,
My vette is due for a brake job so I’m looking to buy 4 new rotors and brake pads. Any suggestions on what is a good brand to go with? I’m not looking to spend $1000's of dollars on some name brand. AC delco has drilled and slotted rotors for a reasonable price...
Does anyone know how to adjust the rag top? If the drivers door closes the window doesnt go under the black piece on the rag top. window needs to be down a little then if you shut the door and put the window up its ok.
I opened up my FOB and the chip had two leads unsoldered. I was able to solder them back down and I held down the lock and unlock buttons until the FOB was reconized. It did work for a min or two but then I tried it again and no responce. before it would only last 10sec so it was better but...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.