Search results

I plan to put 17x9.5 rims with 275/40x17 tires for the front and 17x11 rims and 315/35x17s on the rear. the rims are repro zr1s with the correct backspacing for the 84 to 87 Vette from Custom wheels Market and was wondering if anyone out there did the same or similar upgrade?

Found Ken's coolant fan troubleshooting post but wonder if this would apply to an 84. It's my understanding that the 84 fans are controlled differently the later years. Thanks Lowell

Good question, have to check tonight. Thanks

Thanks already did. Long live Crossfire!

Thanks already did. Log live Crossfire!

Replaced temp sensor because of an other problem and my main fan works as it should. Thanks Lowell

AUx Fan Air hasn't work since purchasing car. Have the compressor but need to find time to flush and replace compressor. I've been thinking the same that it only comes on with the air, but I would like to get confirmation Thanks ]

My aux fan on my 84 is not working. Checked the wiring diagram in the factory manual and it does not show the wiring. Just wondering when does the fan come on and what triggers it so I can trouble shoot it. The fan works when I apply voltage to it. Any help will be appreciated. Thanks Lowell...

Wondering if anyone can recommend a re-builder for the od unit who has the latest upgrades. I have an 84 with the z 51 pkg. and a 425 hp 383 create on the engine stand and want the trans to survive. Thanks Lowell

My 84 Z-51 has the alloy drive shaft, plus it has a camber brace that looks factory. Anyone esle has this? Lowell

Update An update on my trans problems. Filled both the od and trans with syn Mobil 1 atf and noticed no extra noise although its pretty hard to here any unusual noise due the the comp ta tires (I think snow tires make less noise.). An added benefit is that the trans shifts very smooth now. Was...

While putting in new at fulid in my overdrive I found the od was overfilled and when I checked the trans it was low. Just wondering if there is a gasket or seal between them and how much of a job it is to replace. Both the trans and OD work fine. Thanks Lowell 84 with the Z51 kg.