Search results

Sold.

I have had alot of interest. I ran it a couple of times on Ebay. A bunch of too low offers. Most want just the chassis without the motor and tranny since the base motor and automatic is not the most desireable powertrain. A few others wanted just the motor and tranny, I guess for a close...

I still have it. Bill

Price reduced to 10,500. Here are a few pics.

This is a completely restored rolling chassis with the original engine and Turbo 400 and air. The engine, a 350 200 horsepower base engine (no smog CKX stamp pad suffix), has been rebuilt .030 over and the transmission was rebuilt with new torque converter. The car was originally a white coupe...

I have another wiper door assembly. This includes the door, molding, grill, hinge assembly and corner molding pieces. The door is in great shape however two of the studs are broken and will have to be removed. The grill is perfect, molding is very good and corner pieces very good. The hinge...

1. Tach is a 5300 rpm redline. Outer metal bezel is great, blue plastic inner bezel is fine except for one mounting ear broken. Gauge works when spun with a drill. Face and needle are perfect. This part is original. $75.00 2. Speedo is in similar condition to tach with one mounting hole in...

These are off a 72 Coupe. 1. Driver side power window motor. Works great and all gear teeth are there and in good shape. Only flaw is one of the spade terminals on motor has half missing but there is still enough there to catch on harness. $75.00 2. Passenger side power window motor. Works...

I will be parting out a 72 so I will have many parts for sale in the coming weeks. I really haven't had a chance to catalogue everything I have yet but here is a start. Items will be sold as listed ie. not broken up for the time being, but will go on ebay if not sold here. I am in Stamford CT...

I saw the case and it is dimensionally very similar but it is not the same case. I know there will be no midplate in the new case. I am very excited by this as well. I am sure it will be worth the wait. The idea is for this to bolt in to anything that had a Muncie. Oh, and in addition it...

I guess only time will tell Norval but if they resemble the new M22 I saw then they will be a very viable alternative.

I have been in FLA for the past 6 weeks or so and need a new front bearing retainer for my M21. So I called the Gearzone(www.Gearzone.net) down in Tequesta and Paul said to come on over and pick it up. Well this was my lucky day since I got a tour of the "backroom" and all the work they do...

I have been in FLA for the past 6 weeks or so and need a new front bearing retainer for my M21. So I called the Gearzone(www.Gearzone.net) down in Tequesta and Paul said to come on over and pick it up. Well this was my lucky day since I got a tour of the "backroom" and all the work they do...

Whiplash, I too love the Torque Thrust D look but the 3.75 backspacing would put the wheel outside the lip. Check out P.S. Engineering. They are expensive but a high quality wheel. Many racers use them. I have a D lookalike on my 69 that are 15 by 8.5 with 4.25 inch backspace but he can make...

MAdvette, I believe if you eliminate some of your free play you will be engaging even sooner off the floor and quite possibly put the throwout bearing on the fingers. Must be something elso going on there, possibly wrong block to pivot ball clearance.

John, I bought this clutch based on many positive recommendations. I was told this clutch would outlast me. I am making 625 horsepower so I felt like I needed to upgrade. I guess I will have to pull it. I was just trying to nurse my Muncie along until the Tremec conversion. Until this the clutch...

I have a new engine and clutch and rebuilt Muncie, all with about 750 easy miles on them. The clutch is a Mcleod Street Twin with aluminum flywheel, Lakewood scattershield, adjustable pivot ball and new pilot bushing. Until this problem the clutch has felt the same as the stock clutch it...

This intake, part #2902 rect. port, was flat milled to a 5.5 inch carb pad height to fit under my 69 L88 Hood. It fits fine with no airbox and with an airbox there was a little interference in the front solved by tilting the back of the air cleaner base up slighly to drop the front. Every car is...

The date code is B 1 5. Works fine. $30 SHIPPED TO LOWER 48.

I have a set off my BB 69 for sale for 25 dollars. One of them still has the green tag on it that looks like HU. They are in good shape but I went with the dual mount monospring setup. E-mail me at sasobvo@netzero.com if you want them.