Search results

I have a set of C6 GM Z51 sway bars, front and rear. They'll fit a C6 or C5. They're in excellent shape. I dont have the end-links for them (I reused the end links I have for the new sway bars I installed). They come with the bushings. On a C6: they are considerably stiffer than the stock C6...

I've heard that the camshaft on these motors (2003 LS6 5.7L) can be removed/installed without removing the intake manifold and removing all the lifters. This doesnt make sense to me ..... but I thought I'd check the story before I pull it all apart. Does anyone know how to do this procedure...

My Z06 has an annoying sqeaking brake problem. I've dismantled the pads a few times .... adjusted the tin shims so that they apply more pressure to the pads ..... but the sqeaking continues to be there. I'm thinking now that the problem is just the type of pads I have on there. Has anyone had...

...this might be a dumb question ..... but my 2003 Z06 does not seem to have an obvious transmission fluid fill plug. The only semi-obvious thing I can see is that one of the transmission sensor connections gets removed to do double-duty as a fill plug. Thanks! eboch

Thought this may be of interest to some ... Bought this kit .... wanting to do the work myself. After some reseach on the web .... I purchased a kit, pod-gauges, and tuning software from A&A Corvette. This kit was noted by others as giving a completely driveable car with loads of HP across the...

Hi; Anyone have any experience with changing LS2 rockers to 1.85:1 units? were the stock springs useable? did the car need a tune afterward? any dyno results? any emissions test grief? Thx eboch

Can't seem to easily remove the plug-wires from the plugs on this motor. Does anyone know if there is a special tool ... or a "trick" .... that gets them off the plugs without damaging them. Thanks eboch

Hi; I recently changed the clutch in my '05 Z51 changed (to a Z06 clutch). As part of this, the shifter & linkage get partrially taken apart. This all worked out really well as far as the clutch is concerned. However, I now have a bit of trouble shifting into first (either at a stand still or...

Hi; I am considering a clutch replacement in my 2005 Z51. The stock clutch slips a bit under hard, full throttle acceleration ... nothing major, but I find it uncomfortably "untrustworthy". Otherwise, I have to say that the stock clutch drives beautifully, has great peddle feel. Does anyone...

Hi; Has anyone out there removed the main center bezel (it wraps around the nav and down around the shifter)? Before I tackle this by trial & error .... any guidance tips on how it's held in & how it comes out? I'd like to get it out without breaking it. Thanks. eboch

I'm a new C6 owner ... I'm not that familiar with the clutches in these Corvettes. I have driven enough standards to have a feeling for how a clutch ought to feel. The clutch on my 2005 does the following; 1/ the pedal doesn't return all the way to the top 2/ it feels like the clutch is...