Bearing Play
I have not checked the bearing play, but i will check it tommorrow.
As a side note, the brakes bled easily this time as opposed to before when I got just a trickle of fluid out. I mentioned before that the PO had made a lot of "repairs" that I am now having to go back and...
Update
Ok, a quick update. I have had my car torn down for the past month working on the suspension and while I was at it, I re-sealed the rear rotors, replaced the pads, turned the rotors and replaced the hoses. I have great flow now while bleeding the brakes. However, I drove the car to...
Some pressure
OK, I disconnected the rear line at the T, before the rubber hoses and there is some fluid flow. Oddly enough, there is suddenly fluid at the calipers too!! I think they are still dragginf some, but i went ahead and ordered new stainless hoses for all four corners. I am about...
Bias Valve
I was reading your post and it hit me that I dont have a warning switch installed on the master cylinder. It looks like this monitors the bias valve? Could having it removed cause this problem? I will remove the bias valve today and check it out. I think the Master cylinder was...
Today I disconnected the brake lines at the Master Cylinder and had an assistant press the brake pedal there was excellent flow from bith lines. I also disconnected the rubber hose form the caliper and had an assistant press the brake. The line barely leaked anything, maybe a drop or two...
The parking brake does not work, there is no way that it is sticking.
I attempted to bleed the brakes by having someone apply pressure to the pedal while i opened the bleeder. just like i have on every vehicle I have ever serviced brakes on.
I have not checked any bearing play or u joints, but...
They are definatley not bleeding with the engine off. I suspect that there is something going on in the ABS module. It seems like they are holding pressure and just real slow to release. if i stop on a slight slope i can feel them release and let the car roll back after a few minutes. Like I...
I just got my '86 a few months back and am in the process of fixing everything that the PO either rigged up or didn't fix on the car (which is a lot!). Anyways, my rear brakes are dragging. I can shift into neutral at like ten mph and the car will come to a complete stop as if the brakes are...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.