Welcome to the Corvette Forums at the Corvette Action Center!

Search results

  1. K

    1987 Pure stock Corvette Coupe

    Idk that D36 has a 3.42 available. You will need to change speedometer gears. To calibrate speedometer. There is one on the output shaft of transmission the other is on the Vehicle Speed Sensor (vss) depending on what you need it's possible to have to change both gears and sensor.
  2. K

    Help! No start

    There really isn't a non professional DIY injector cleaner. You could send them out to FIC or another injector service and have them tested then rebuilt or replaced. Dealers should have stuff to check and test, but not to repair.
  3. K

    Help! No start

    If you have a noid light you can see if injectors are turning on. A test light will do the same thing. But test light has to be connected to positive terminal. Computer grounds injectors There are two batches of four. Good Luck. Post what happens
  4. K

    Help! No start

    You need a gauge to check pressure, if less than 40 check regulator. If vacuum port leaks fuel it needs replaced. Pump is in tank. Pump fuel filler well to access. You might add 5 gallons to be sure it's not just low on gas. With well out you can block return line if pressure is over 40...
  5. K

    Oosing blisters on LT4 doors!

    that kinda looks like cosmoline ,which was used shipping cars across the ocean. It can be a pain to remove on metal. If it is I wouldn't mess with it, The solvents to remove it, may attack resin in door.
  6. K

    Oosing blisters on LT4 doors!

    Since cars are shipped by boat to and from Hawaii it maybe some kind or "rust preventer" Not knowing what it is, I would talk to a marine supply store for suggestion of what to do.
  7. K

    LT4 10mm LT4 rocker studs

    it seems i have the original 10mm nuts and 3/8 rocker arms. Just a "Senior Moment" :happyanim:just need correct lock nuts.
  8. K

    LT4 10mm LT4 rocker studs

    I got the rocker arms and nuts several years ago. I thought they were normal roller rockers not realizing they were the production non adjustable set up. Chevrolet chose to build 2 LT4s the "over the counter" version used different studs, rockers, and locking nuts. I'm just trying to use what I...
  9. K

    LT4 10mm LT4 rocker studs

    Unfortunately those are the opposite of what I need. 10mm threads in to head and 3/8 stud for commonly available rocker arms. Thanks though.
  10. K

    LT4 10mm LT4 rocker studs

    I have a set of production non adjustable LT4 rockers and nuts, I can't find studs. Has anyone ever tried to use Pontiac bottle neck studs in place of the pedestal studs used on LT4. They are 7/16 at the bottom and used 3/8 nut at top
  11. K

    Power Seat Track Transmission Replacement?

    If you remove seat cushions it is easier to see what is going on.
  12. K

    Valve seat / Valve work info needed

    Generally when one rebuilds an engine that would include the heads, a valve job and new seals would be the norm. I do understand the part that these the less than desireable iron heads. Although I don't recommend it you could clean chambers and lap valves in and replace valve seals. You would be...
  13. K

    1984 Dash Display

    no speed sensor signal would set code and turn on check engine light. I believe vss signal goes to cluster and the then to ecm. I would have cluster checked. this may help CrazyUncleBurton.com - Home Page
  14. K

    E-Brake Cable Replacement

    I think its just a matter of preference and budget. If your planning on driving it when the snow flies I would go with stainless if possible.
  15. K

    Question: Car doors not unlocking fully on keyless remote unlock

    OEM Remote Keyless Entry does not have a automatic function in 1992. That came in 93. You definitely want to make additional door key. Unlocking services should be able unlock it. You do need to find out whats binding in doors.
  16. K

    Question: Car doors not unlocking fully on keyless remote unlock

    If you can find out alarm brand and model number try to contact manufacturer, authorized dealer/installer, or google with condition. Tell them whats going on see if they can give advice. Depending on when it was installed it's a "92", alarm may too old for info. Some techs would want to remove...
  17. K

    Spark Plug Wire Resistance, How Important is This Spec?

    Low resistance causes EMI solid wire core or copper core wires are only used on old time antique cars and some drag cars. Most modern cars are using 7mm or larger wires. Normally they will ohm out less than 10K per foot or 15k entire wire. The larger wire diameters came as the ignition coil...
  18. K

    Question: security system not working

    Typically aftermarket alarms tie into car under steering column and the module is attached or tucked under there too. It's possible wiring was disturbed or disconnected during course of column repair. You should have repair shop review their work to make sure everything is connected correctly...
  19. K

    Question: Driver side door leaks water when it rains

    Waterleaks are a pain. they are also hard to tell someone what to do without seeing car. There should be a weather seal or barrier that seals door from door trim panel they can deteriorate, get torn, or removed over time. If the are not in good shape you need them. they use a bead type seal to...
  20. K

    Question: Engine missing at light throttle

    Slight miss under light load is usually a lean condition. The egr valve under intake doesn't allow for much testing you could disconnect it and see what happens. Make sure maf is clean of any oily film.
Back
Top Bottom