Hello, I have been searching for a spare tire for my 1980 Corvette for a while and haven't been able to come up with the "donut" spare. I am having new tires installed and I am considering keeping one of the old tires as a spare if I can find a suitable (cheap) rim. My question is, will the...
So last night I went out into the dark garage started the engine and immediately saw the arching from the number 5 plug wire which had come off the spark plug. Problem solved. Thanks again guys.
The other day I noticed a "clicking" sound almost like arcing coming from the distributor. The engine is running fine. The cap and rotor are less than a year old but I replaced the rotor anyway. Any ideas?
Thanks for your response. I was able to find the part which is Corvette Tilt & Telescopic Lower Contact W/Spring. I was under the impression that the part slid into the hub when it actually sits behind the hub and the "locking sleeve" slides in from behind. I was trying to void pulling the hub...
Unfortunately not. I need the locking sleeve which is inserted into the hub so that the horn contact spring is locked in place. I am still trying to determine if it is a separate (hopefully) piece or part of the hub. Thanks anyway.
Hello. I have been having problems with my horn working. I decided to investigate and found that the plastic sleeve in the hub that houses the spring is cracked and won't allow the contact to seat properly. Does anyone know if that plastic sleeve can be replaced or do I have to get a whole new...
I do have a recommendation from my mechanic for a transmission shop. Since it is shifting fine and it's almost time for winter hibernation I will wait till spring if I need further diagnosis. Thanks for your reply.
I have a 1980 Corvette with an automatic tranmission. Recently the exhaust donut on the righ side disintgrated. I also had a problem with my transmission where it was up shifting through the gears very quickly. It was in third gear before I reached 20 miles per hour. It got to the point...
Just purchased a set of yellow Proform valve covers for my yellow Vette. The new covers are tall. Is there any problem with replacing my current valve covers with tall covers? Is there any benefit? Thanks.
Changing the transmission fluid, filter, and gasket, draining out all of the pieces of shrapnel that have been ground off the transmission over the years, adjusting the bands if necessary. AKA transmission service.
I have an issue with my 1980 Corvette shifter not always engaging when I shift into drive. I have to take it out of drive and then shift it again. I had the transmission tuned and the shop couldn't find anything wrong. Any ideas?
I believe I have asked this question before but it's been awhile so I'll ask again. I have a 1980 Corvette with a 1979 front clip. Does anyone know if Chevy ever built any Corvettes like this? I have tried numerous times to trace previous owners but have not had any luck. Thanks.
Thanks, but not exactly what I need.
I have a new retaining ring, emblem and cap. The emblem and retaining ring mount on 3 "posts?" within the cap. These posts then have to be flattened in order to keep the emblem and retaining ring in place. My problem is how to flatten those posts.
Hello. Last Sunday while I was driving along my horn button dropped off into my lap after hitting a bump in the road. After looking at it I could see that someone had kind of pieced it together. I purchased a new horn button kit which arrived today. In trying to assemble it I was confused...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.