Hello group! I am in need of a speedometer for my 81 vette mine broke. The part where the speedo cable goes into is worn out. So I need a new or used unit. Pm here if you have one.
Well I brought my vette out after a long winter and Yikes it stinks!!! There must be a dead mouse in the HVAC unit! I sure do not want to pull the dash and ripping things apart trying to find his little dead @$$. Taking the blower out looks like it might offer a good view in there.All I know it...
I have a 85 monte ss that has the original paint not faded but its always had orange peel. can or should I have it wet sanded and buffed? Or should I just leave well enough alone?
Theres a 77 vette near me for 3900 obo. Its a 77 with a L-82 auto trans white with a black interior. Its been in storage for some time looks decent from the pics should I even bother to check it out?
Anyone here ever install a Hurst shifter in there vette? I have a super competition shifter with linkage and would like to know if you installed it with the trans in the car or out.
My 81 with a T-10 has become difficult to shift into second gear.The clutch is adjusted fine and I diddnt see any bent or missing parts. But what I do notice is this,the shifter seems to have much more travel going from first to second than say from third to fourth.If you look at the space...
I think my dash lights are possesed! My dash lights will blink on and off go out and when I slap the bottom of the dash they come back on! I checked the plug in the the circuit board its pushed in all the way in and tight. Also I would like to point out its only the instrument panel lights that...
A while back a few people asked about how they could correct the speedometer on their 80 to 82 Vette when going from a 2.72 gear to a 3.54 ratio.I was told that the % of error was 30% providing you were still running the stock tire size. In my case my tire size is 255 60 15. I have found a...
Hello group! I was thinking about putting a ATI procharger or simular on my 81. The engine is pretty healthy as is im looking to get into the 11s if possible.As it stands now my best pass was a 12.59 @ 110 mph just wondering if its worth the cost and if im going to have a hood clearance issue.
Any one here running slicks? If so what size? I picked up a pair of Good Year 27.5 x 11x15 for next to nothing! im wondering if they will fit? As of now im running 255 60 15s and have no traction!!
On my 81 I have a rear sway bar albiet small diameter, and I was wondering if all 4 speed vettes that year had one? Also on the bracket for the strut rods in yellow paint is the letters FE7 does that mean anything? Ive heard stories about a special suspension that could be ordered, how do you...
Hello gang. Im going to be replacing my clutch in my 81 due to the throw out bearing making noise,what I need to know is this.What size clutch did the 81 come with? I see listings for 11 inches and 10.4.Can either be used? Also ive heard that the corvette uses a spefic style bent finger clutch...
HI Ive got a problem with wheel hop I diddnt have before I did the gear swap on my 81! Yesterday after making sure the new gears were broke in I did my first launch with the 3.54 gears.It came off the line quick but it wheel hopped something horrible!!!! I shifted from 1st to 2nd and when I let...
Hello gang!! I just finished putting a 3.54 gear set in my 81 wich had a 2.72 set. Im also running a 4 speed trans,after reading all the posts I could find here im still a bit confused on how still to fix the problem of my speedometer reading about 20 miles an hour too fast.I am aware that the...
Ok after reading much of the threads about stub axle wear I belive I have a real odd problem!! Today ,,,well actually this morning I finally got to the innards of my diff.. As far as I can tell the stub axles look real good but the center pin for the sider gears has grooves wore in it from the...
Who can I contact about getting either my spindle rebuilt or getting one thats done allready? I was doing strut rod bushings and noticed the outside bearing on the passenger side has noticable movement and I dont need more trouble:ugh
Well im really up against it!!!! Im trying to remove my strut rods on my 81 so I can replace the bushings,but I cant get the lower shock mount out of the spindle support!!! Any clue how I get them out I tried hitting them with a hammer but no go,and I reallt dont want to break something.:cry
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.