Search results

FIXED!!! Ebay light switch fixed the problems. I now have courtesy lights using the slider on the light switch, instruments light with parking or headlights on and dimmer slider works. Thank all of you for the kind informative replies. I am not much at electrical trouble shooting but I do...

Yes I am positive on that, pins are not pushed out of the connector. I checked both switched with ohm meter and got nothing between pin F (ground) and pin B the white wire to the courtesy lights with the ewitch slider move to the courtesy light position. I will report back on this thread when I...

EC55, Thanks for the suggestion, I checked and there is continuity between the white wire at the switch and the foot well light. It is pretty much bas switches. I got the second switch from local junk yard. What are the chances of having 2 bad switched. pretty unlikely but I have them. Any...

It has to be the headlight switch !!! Interior lights come on when shorting the white wire to ground at the switch connector. I checked both switches with meter and found both bad between white wire and black wire. I will try to find a GOOD headlight switch. Thank you guys for the help and hand...

Courtesy lights work OK with doors. After looking at the manual the white wire connects to S232 (that I have not found yet) looks like grounding to all courtesy lights are here. Book says it is located to the left of the passenger glove box so I will have to remove the underd0 ash cover on...

Checked the ground wire as suggested and have continuity from black wire on switch and ground cable at the battery. Same symptoms with 2 different headlight switches. Any other suggestion. Thanks for the replies. Mike

Thank you I will check that tomorrow. How in the world did the designers and engineers manage to come up with the wiring for these cars? They took simple circuits and intertwined them so that if one thing goes wrong it has repercussions throughout the electrical system. Perhaps there is a level...

When I purchased the car it has an after market remote entry system installed by the previous owner with no remotes. It was a very crappy install with some wires simply twisted together and taped. I removed it and reconnected all the cut wires with solder and shrink tubing insulation. The...

What is the best method to clean the dash cluster connectors on 92 Corvette. I have some intermittent LCD display problems. When the LCD display acts up I can tap the top of the dash and it starts working correctly again. Sometimes I can simply push on the dash cluster on the bottom left side...

Found a vendor with it in stock thanks to a member here. Thanks Mike

Found a vendor with it in stock thanks to a member here. Thanks. Mike

I need power door lock switch for drivers side door and power window switch for drivers side door also. Power window is the one that operates both windows. Thanks.. Mike

The power door lock switch on drivers side is bad and I can not find a replacement. I can find one for 84-89 but no 92 ones. Is there an alternative switch or a source for them. I have done search a d looked at several vendors with no success. Thanks for any replies. Mike

Need some more help here. I can get to the passenger side head Ok but that darn ASR thingy is really in the way on the drivers side. Do I just unbolt it so it can move around a little? Or do I remove it completely? How the heck do I remove the cables going to it to remove it? PLEASE HELP ME...

OK Guys, there is combustion gases in the coolant. As the Queen of Hearts would say "off with her heads". Luckily there is a first class cylinder head shop near me that has done work for me before with great results. Thanks again for the replies and holding my hand. I have coolant drained and...

Thanks Guys for the replies. My 1992 Corvette Factory Shop Manual says to torque to 65 foot pounds in three increments with no mention of torque angle so it must have just plain old standard head bolts. I will replace them if I pull the heads, I have always used ARP bolts and will use them here...

WOW no replies, guess I am on my own. I have a friend that owns a Combustion Leak Tester coming over tomorrow. That will tell me if there is a leaking head gasket and I will act accordingly. There is no coolant in the oil. I will go ahead and replace the Optispark at the same time along with the...

I had the small coolant line to the throttle body split open and lost all coolant, I drove the car for about 2 miles leaving a stream of steam behind it. Car had been running very good until this happened. Now when I start the car it will usually start and idle and run good. BUT!! At times it...

Car is 1992 Corvette Coupe, LT1 automatic. I have had a couple of other C4 Corvettes but they were L98, I am new to the LT1. Car has 54,000 miles and I have owned it for 6 months. 1. Coolant temperature is 198 to 201 normal driving and 203 to 206 in slow moving traffic with outside temperature...

"Let your plans be dark and impenetrable as night, and when you move, fall like a thunderbolt." - Sun Tzu It seems this is exactly what Rob has done. No documentation for a performance part is simply not done. A I am better than anyone attitude just adds to the picture.