Welcome to the Corvette Forums at the Corvette Action Center!

1965 front cross over brake line

twoseater

Well-known member
Joined
Aug 14, 2004
Messages
118
Location
Milton,Vermont
Corvette
1965 Blue Vert, 1980 White Coupe
Hello - purchased a front crossover brake line that is supposed to be bent to factory spec. However, I for the life of me can’t see how this will fit. My aim manual is very unclear as to routing and what I pulled out is prob not factory. Anyone have pictures or the proper route? FYI - radiator and fan had to be removed to get access for those who do this in the future.

Here’s what I’m dealing with right now:
 

Attachments

  • IMG_6913.jpeg
    IMG_6913.jpeg
    1.7 MB · Views: 28
  • IMG_6912.jpeg
    IMG_6912.jpeg
    2.2 MB · Views: 23
  • IMG_6911.jpeg
    IMG_6911.jpeg
    2.1 MB · Views: 28
  • IMG_6910.jpeg
    IMG_6910.jpeg
    1.9 MB · Views: 23
  • IMG_6909.jpeg
    IMG_6909.jpeg
    1.9 MB · Views: 23
  • IMG_6908.jpeg
    IMG_6908.jpeg
    1.8 MB · Views: 24
FWIW that seems to the correct route. Had to do some custom bending but it seems to have all gone back together Ok. Radiator, fan, water pump hose all had to come you for easier access.
 
Not uncommon to have to do a little custom bending on these pre-bent lines. It looks good.

Tom
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom