Rudy's Stingray
Active member
- Joined
- Aug 13, 2007
- Messages
- 28
- Location
- Grand Rapids Michigan
- Corvette
- 1970 350/350 2 top convertible
Greetings!
Can someone tell me roughly the length of their front pipes -
from the exhaust manifold to the point where they intersect with
the mid-pipes? I have a debockle exhaust system.
Its a long story.. In the end, I am putting on the correct exhaust manifolds,
I need the front pipes from the manifolds to reach the mid pipes which,
I do have. When I cut off the 2 1/2" headers, i found there was another 20"
worth of 2 1/2 " pipes from the headers to the mid pipes, with a 2" reducer.
So, I need to make sure before I buy the new front pipes that they are
going to be long enough before I cut the rest of the 2 1/2" pipe and reducer
off. I also need to know if there is a 2" coupling that will allow the new 2"
front pipes to mate with the 2" mid pipes. Confused?
Thanks.
Rudy
Can someone tell me roughly the length of their front pipes -
from the exhaust manifold to the point where they intersect with
the mid-pipes? I have a debockle exhaust system.
Its a long story.. In the end, I am putting on the correct exhaust manifolds,
I need the front pipes from the manifolds to reach the mid pipes which,
I do have. When I cut off the 2 1/2" headers, i found there was another 20"
worth of 2 1/2 " pipes from the headers to the mid pipes, with a 2" reducer.
So, I need to make sure before I buy the new front pipes that they are
going to be long enough before I cut the rest of the 2 1/2" pipe and reducer
off. I also need to know if there is a 2" coupling that will allow the new 2"
front pipes to mate with the 2" mid pipes. Confused?
Thanks.
Rudy