Welcome to the Corvette Forums at the Corvette Action Center!

64 motor compartment paint

DUAL QUAD

Member
Joined
Mar 13, 2005
Messages
19
Location
RHODE ISLAND
Corvette
1960 1964
Can anyone tell me if the motor compartment in a 64 is suppose to be gloss or semi gloss.The motor is out, have to paint it.Thanks Dual Quad
 
Neither - it's semi-flat, like an "eggshell" sheen; Krylon #1613 Semi-Flat, John Deere "Blitz Black", flattened black lacquer, etc.
:beer
 
Just another option

DUAL QUAD

I have used just about every available "semi-flat " paint on the market, and the best results I have ever obtained as far as coverage, ease of application, spray pattern, etc. was with " SEM Trim-Black " # 39143. It is a professional grade finish, relatively inexpensive, and can be found ( it's not a Wally-Mart thing ) at most of the auto-part stores.

Inner fenders, firewall, and under hood area, can be properly covered with two cans, and it will give a professional, like new finish to your parts.

As with all paints, a properly prepared, and cleaned surface, will do wonders to your project.

regards
Bob
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom