Welcome to the Corvette Forums at the Corvette Action Center!

65 Roadster Wheel/Tire Size Help...

1965RRR

Well-known member
Joined
Feb 25, 2005
Messages
66
Location
Exit 63 - Jersey Shore
Corvette
1965 Rally Red Roadster
Without making alterations, what are the largest size wheels and tires that will fit on a 65 Roadster? I'm leaning toward old style Cragars or American Racing Torque Thrust Wheels.
Any suggestions will be greatly appreciated.
Thanks.
 
Hi, I have a 65 Roadster with 15 inch wheels (the fake knock-offs). The biggest tires I could fit on there without rubbing were 215 65s. Another thing I had to worry about was lowering my car. I Have a 427 with side pipes and if I am not carefull I scrape going over speed bumps.

Good Luck
 
I put Cragar S/S wheels and BFG tires on my 64. I worked with www.newstalgiawheel.com to buy them and went with what they suggested and I am glad I did. I used 15x6 Cragar S/S wheels with 3 3/8" backspacing and P21570R15 BFG tires. I was hoping to go 7 inch wide wheels and larger tires but Newstalgia said I woud have problems, and they were correct. This has been a perfect combo and the price was right. They came mounted and balanced and ready to bolt on the car.
 
Lucy64 said:
I put Cragar S/S wheels and BFG tires on my 64. I worked with www.newstalgiawheel.com to buy them and went with what they suggested and I am glad I did. I used 15x6 Cragar S/S wheels with 3 3/8" backspacing and P21570R15 BFG tires. I was hoping to go 7 inch wide wheels and larger tires but Newstalgia said I woud have problems, and they were correct. This has been a perfect combo and the price was right. They came mounted and balanced and ready to bolt on the car.

i had a set of 15x8 torq thrusts with 215/75/15 tires on my 65 and couldn't turn the wheels without rubbing, so i went with 15x7's with the same tires...i did have to adjust the rear camber to make sure and not hit the rear fenders on big bumps...know anyone looking for a perfect set of 15x8 torq thrust II's?
 
fredd65 said:
i had a set of 15x8 torq thrusts with 215/75/15 tires on my 65 and couldn't turn the wheels without rubbing, so i went with 15x7's with the same tires...i did have to adjust the rear camber to make sure and not hit the rear fenders on big bumps...know anyone looking for a perfect set of 15x8 torq thrust II's?


Thanks for the info.

Maybe someone reading this will give you a call on the wheels.
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom