Welcome to the Corvette Forums at the Corvette Action Center!

86 Corvette Shop Manual

  • Thread starter Thread starter jiangtao
  • Start date Start date
J

jiangtao

Guest
where can i get one of these for a decent price? we were changing the fuel pump relay the yesterday and ran into a weird problem. the yellow wire{hot}going into the harness seems to always be hot.even without the ignition on. when we moved the wire by itself{turning wiggling} the fuel pump would come on and the keys weren't in the ignition!!!also we got a clicking noise from the junction box behind the battery. this is a new one to me! i am hoping to find something {repair manual} that will have a good electrical diagram.
 
I got mine from ebay.

Just in case though, check the wires going into the connector, on mine the wire coating had shrunk back and was exposing bare wire. Every now and then they would touch giving me an error code or even worse the wires in the MAF would light up and stay on (burn off).

check the wires as they go into each connector.
 
You can find them on eBay but try to get a new manual set rather than used. Also, make sure they have the red covers. The white covered versions are pre-production ones. There are two volumes.

You can get brand new manuals from Helm, the company that prints them for GM. www.helminc.com
 
if i remember correctly my wires had shrunk a little! what should i do in that case??
 
What I did was buy some liquid wire caoting, paint it on with a small brush and never had a problem after that.

Of course the real smart solution would be to buy new connectors and replace them.

Mart
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom