Welcome to the Corvette Forums at the Corvette Action Center!

90 coupe

jjarrett

Member
Joined
Nov 11, 2006
Messages
22
Location
north carolina
Corvette
1990 black coupe
hi! my mechanic at the dealership says my 90 vette needs a ccm computer,but the item is not available. does anyone know where i might purchase one?---thanks---john
 
thanks for your reply charlie! i believe there is a difference in the ecm and the ccm computers.the ecm seems to be alright. the ccm,which is located under the center dash is the one i am looking for.none of the catalog suppliers has this part.so i guess a salvage supplier will be my next hunt.--thanks again tho!!---john
 
Blushing! Should have known that!!! I googled around.. not much, ??ECklers, Ebay? Corvettte central??
Charlie
 
Not that I doubt the abilities of your mechanic, but have you checked for codes to verify? It's really pretty simple to do. You can post any codes that display for help.
I thought I had a bad CCM(VATS issue) last summer, but it turned out to be a loose connector that plugged in to the back of the unit.
If I remember correctly, CARDONE remans these, so you might check there.
 
Another place I've heard of that rebuilds CCM's is vette2vette, but as mentioned be sure it is really needed, good luck.
 
Very hard to come by apparently .Has to be correct for MY.
New one FS on Corvette Forum a while back @ $325; stated dealer price was over $500
Email me the # off the CCM
I can't remember if I sold the '90 CCM or the SIR box back to the US. Have to check my "spare parts" dept , you might be in luck
vetteoz@optusnet.com.au
 
ccm for 90

thanks for your input guys! i found a rebuilt one at NAPA,ordered it,hope it works!---john
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom