95 Front Spring

[alan ream]

I have a 95 with a most irratating problem. Every time I enter or exit a driveway, I have to come to an almost complete stop so that my plastic air dam doesn't scrape. I know, the front end is low, but it happens on almost every curb I come to.
Is there a way to raise the front end about an inch so that this stops. I don't want to do anything unsafe, but one inch sure would help. I read somewhere else that the front leaf spring is adjustable, but I sure can't find any evidence of this.
Any help is appreciated.
Almost forgot, it's a stock LT-1 with 72K miles. Tires are stock all around.

 

[Vette_Newb]

You sure no one has ever lowered it? My 89 never really comes close to scraping even on my inclined driveway.

 

[alan ream]

You sure no one has ever lowered it? My 89 never really comes close to scraping even on my inclined driveway.

I wouldn't know what to look for in lowering either. On level ground, how many inches is there between the bottom of your dam and the ground, I have about 4".

 

[compyelc4]

My stock '95 rides about 5" off of pavement. What does yours' measure?

Crap, if it really bugs you just run a line about 1" from the bottom edge and trim away! No harm done.

Ted