Welcome to the Corvette Forums at the Corvette Action Center!

A Good Vendor To Do Business With.. I Enjoyed Spending My Money With Them

Viet Nam Vett

Well-known member
Joined
May 28, 2004
Messages
2,410
Location
Egg Harbor Township NJ
Corvette
65 BB 502 Cp /MSD ATOMIC EFI/ 2009-HUMMER H2
In working out the new wireing for my BB502 Install I need to do some wireing changes. These changes involve the alternator and routing of the wires a different fashion. After Speaking with Bill B....He suggested speaking with ...

M & H Fabricators Inc. http://www.wiringharness.com/. I took Bill's advice and called them. I spoke with John who took his time with me on the phone and answered all my questions. After a while we were able to come up with a game plan for the new harness.

I ended up bying a new Engine and Lighting harness. His prices are very very good. This Vendor is like a "Tom Dewitt" type vendor. He takes his time to help you select what you need. And if need be can build any kind of a custom harness you need .

If you need wiring for your Vette or your Classic Street car...Give John a shout..They know what there doing and how to treat a customer.

A good Vedor....:beer
 
Is that M&H out of Santa Fe Springs, CA? I can't find an address on their site. ;shrug
 
Ken said:
Is that M&H out of Santa Fe Springs, CA? I can't find an address on their site. ;shrug

From their site:
Mailing Address

M&H Electric Fabricators, Inc.

13537 Alondra Blvd.

Santa Fe Springs, CA 90670
:D
 
The first place I should have looked. :duh

But half the time a "contact us" link simply opens an e-mailing. :hb
 
Ken said:
Is that M&H out of Santa Fe Springs, CA? I can't find an address on their site. ;shrug


Doing some wireing there Ken.....???????
 
Not at the moment. However, I was looking at them (I may have even talked with 'em) when I was in this phase of my last round of projects:

unwired0005.JPG


unwired0004.JPG


They would have been closer geographically for me than the guy I finally chose to help me; thirty miles as opposed to ninety. :(
 
Ken said:
Not at the moment. However, I was looking at them (I may have even talked with 'em) when I was in this phase of my last round of projects:


They would have been closer geographically for me than the guy I finally chose to help me; thirty miles as opposed to ninety. :(

Hot Damm...!!! What the hell yah got their Ken.... A Hot Rod C-4!!!.. Yep That's right up there alley.....
redn.jpg
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom