Welcome to the Corvette Forums at the Corvette Action Center!

any pics of rear wings

  • Thread starter Thread starter beamer
  • Start date Start date
B

beamer

Guest
hi, I'm thinking of putting a rear wing on my 96 collectors edition. i like the wrap around style ones. thet start at the begining of the rear hatch and wrap around. they look like they are only 4-5 inches high. ecklers, mid america and corvette central all carry them, but i haven't been able to see a great picture. any one with pics, i'd appreciate info and install info.
 
Way to similar to the Trans-Am for me.
 
My signiture picture. and other angles.
me.jpg
 
Wings

Beamer,
When I purchased my '90, it already had a wing. Low slung and I think it adds some to the car. I only have a couple pics here in the office and I'll try and email them sep to you since they're too large to attach here. If you want some close-ups, I can snap a couple this weekend and send them to you as well.

:Steer
 
You might take a look at the C4R wing at greenwoodvette.com if you like the wrap around look.
 
Hawillian Punch what kind of wing is that???

Please let me know.

Chris
 
84vetteboy said:
Hawaiian Punch what kind of wing is that???

Please let me know.

Chris
Actually it is a reconstructed one, that I made from a aftermarket one that I bought.
All that I did was take one louvre off and the end pieces were re-shaped by cutting and grinding it down to make it much smaller then it originally was, heres some before and after pictures then you'll see what I mean...

http://www.villagephotos.com/viewpubimage.asp?id_=5011195

http://www.villagephotos.com/viewpubimage.asp?id_=4176055

http://www.villagephotos.com/viewpubimage.asp?id_=5011107

http://www.villagephotos.com/viewpubimage.asp?id_=4175888

http://www.villagephotos.com/viewpubimage.asp?id_=5011553


http://www.villagephotos.com/viewpubimage.asp?id_=4175913

http://www.villagephotos.com/viewpubimage.asp?id_=5010973


if you need to know what "brand" name it is, I'll have to go to the mall here and find out, let me know.
By the way, if you notice that the wing is set off towards the back of the car so that I'll still have my access to the gas lid also it's not very high, it was already designed that way thats why I bought this one.
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom