Anyone have a shift console cover for 4+3 transmissions?

[Fiddler's Gold]

I haven't been able to locate a source for a replacement shift cover plate for my new Tremic T56 tranny that was put in place of the existing 4+3. I am assuming that the standard cover plate would suffice for the time being. Let me know if you can help.
Thanks,

Fiddler.

 

[-=Jeff=-]

Good luck on that piece.. They have been disontinued from GM along with the 89 6spd plate.. When new they were over $150.. You may want to try Corvette Salvage yards..

Good Luck

 

[Ken]

Good luck on that piece...

That's right, automatic plates are available, but nothing for the manual transmission equipped cars. Lady Luck will be your only help here.

_ken

 

[JonM]

I have one for an 84 I'll sell. Its not in the best shape. The ash tray door was open and some girl sat on it and broke the two plastic pieces off under the piece. The graphics are no longer visable. Being its for an 84 the OD button is on the console. I can post pics tomorrow if you like 50 +shipping. I also have another one of the same year in much better shape. You can still see the graphics (faintly) and inside the center glove box where you screw it was cracked ...I epoxyed a small washer to it. It to is for an 84 and has the OD button on the console. 150 + shipping

 

[Fiddler's Gold]

send me the pics for the 2 of them!

Send the pics to my email:
fiddlersgold@charter.net

Thanks a million!
Fiddler

 

[JonM]

You have mail