Anyone Use CNC Cylinder Heads in Florida?

[No Go]

Any experiences with this head porter?

Figured they were one of the pioneers...and I have heard good things about them...I couldn't go wrong...

Thanks

 

[Ken]

I moved this to the C4 Technical forum in hopes of generating more response. Good luck in your search.

_ken

 

[Springer's LT4]

Pete is local to me and certainly knows his stuff, at lot of people I know use him for rebuilding heads and mild porting, for all out race porting thou, their are better guys out there.

 

[-=Jeff=-]

Springer's LT4,

you say there are better guys out there, I am curious you stated that? Do you mean better guys to deal with? or pguys that do better work?


No Go,

I have a Set of CNC ported L98 heads from them in my car. I don't have flow #'s or all the specifics since I bought them used, but I do know that I swapped from stock L98 heads to my CNC heads and went from a 13.8 to a 12.8 in the 1/4 without any ECM tuning

 

[Springer's LT4]

Guys that do better work on all out porting jobs... Pete is a great person to deal with, very smart in his area. If I wanted a nice porting job for a street car, I'd have no problems using him... if I wanted to get every last bit of power out of my heads, I'd look elsewhere.

 

[-=Jeff=-]

Guys that do better work on all out porting jobs... Pete is a great person to deal with, very smart in his area. If I wanted a nice porting job for a street car, I'd have no problems using him... if I wanted to get every last bit of power out of my heads, I'd look elsewhere.

Yeah I have to agree with you on that. If I wanted an all out race set-up/ heads i would look elsewhere too.

 

[c4c5specialist]

Hi there,
CNC cylinder heads are used by many aftermarket power tuners, including Callaway, on the C12 design supercar.
Extremely high quality, and impressive designs.
Allthebest, c4c5

 

[No Go]

Thanks for the feedback.

I've pretty much decided to go with him. Seems quite knowledgeable and up front.

I would love to cut a second off my times, but I will be happy with a more realistic number...

 

[-=Jeff=-]

Thanks for the feedback.

I've pretty much decided to go with him. Seems quite knowledgeable and up front.

I would love to cut a second off my times, but I will be happy with a more realistic number...

Yeah I know the 1 sec is not a reasonable # the only other thing I can think of is the Weather was a bit cooler for my 12.80 run but I also think with the CNC heads I bumped the compression up a bit.

 

[sothpaw]

contact info

I tried finding this CNC cylinder heads place on the internet.

Can someone post info? I'd be very interested.

 

[-=Jeff=-]

Re: contact info

I tried finding this CNC cylinder heads place on the internet.

Can someone post info? I'd be very interested.

http://www.cncheads.com/