c2 knock off lug nuts

[michael sommers]

Could someone help id Pre 67 knock off lug nuts. There is Id confusion at some of the corv. parts sites. I will submit
3 photos 2 of the lug nuts and 1 of the adapter. I have
noted that the adapter does not seem to have a bevel for
the tapered nuts. Maybe someone could comment on this
as well.
Thanks

 

[Bill Wilhelm]

Michael, The first pic is of a '64-'66 KO wheel adapter nut, second pic looks like for aftermarket wheel, third pic is a repro adapter for '64-'66 KO wheel. The adapter does have a bevel, it's just hard to see in the picture. Bill

 

[JohnZ]

The second photo is a long-shank aftermarket lug nut and washer used on reproduction '67 bolt-on aluminum wheels; the original bolt-ons used the same standard lug nuts as used with stock steel wheels.

 

[michael sommers]

Bill
thanks for clearing up the confusion.
I now know what to order
Thanks again
Mike

 

[michael sommers]

Thanks
John
I believe I understand , there are 3 different nuts used
depending , the standard lug nut 56-82 used on steel and original 67 BOLT ON wheels. The longer tapered lug nut used on original and repo KNOCK OFF wheels 64-66 . The long shank lug nut as you describe used on new style repro DIRECT BOLT ON wheels 64-67

I believe this is correct
thanks

 

[JohnZ]

Thanks
John
I believe I understand , there are 3 different nuts used
depending , the standard lug nut 56-82 used on steel and original 67 BOLT ON wheels. The longer tapered lug nut used on original and repo KNOCK OFF wheels 64-66 . The long shank lug nut as you describe used on new style repro DIRECT BOLT ON wheels 64-67

I believe this is correct
thanks

I'm not familiar with the details of the direct-bolt reproduction knock-offs, but the long-shank lug nuts are used on the reproduction '67 bolt-on wheels (RPO N89) - photo below.