C4 frame drawings

[DonkerV]

Does anybody have or know where I could get the C4 frame drawings with dimensions ?

Thank you
DonkerV

 

[c4cruiser]

The C4 does not really have a "Frame" It's sort of a monocoque design and the steel part includes the interior cage, windshield pillars and dash surround and the B-pillars with the integral roll hoop. The fiberglass components are bonded to the structure.

Dave McLellan's book, "Corvette From The Inside" has some prototype drawings and pics of the chassis along with a really neat history of how the assembly was developed. As far as specific dimentions, I don't recall seeing engineering drawings with sspecific dimensions. Collion repair facilties may have some information on dimensions that they would needed for repairing damage.

 

[The Car Whisperer]

My 1986 GM service manual has reference dimensions to check frame alignment. Is this what your looking for?

 

[militant_x]

And i thought of this post... http://www.r-dracing.com/Camber-brace.htm has some drawings. No dimensions though...

-chris

 

[AStockVette]

My GM service manual has a frame drawing with basic dimensions, but is not very details. One of the guys in a local club was friends with a tech at a local Chevy dealer and he copied drawings from a shop manual for me that were considerably more detailed and had many more dimensions. You might also try an aftermarket shop that specializes in frame straightening.