Alweeja
Member
New or re-built
Calipers
- Thread starter Alweeja
- Start date
douglasamariani
ASE Master Tech
- Joined
- May 12, 2008
- Messages
- 303
- Location
- Anaheim Hills CA.
- Corvette
- 2008 6.2 Coupe,1980 L48 Coupe,1968 427/4spd Coupe
If you purchase rebuilt make sure you get them with the stainless steel inserts and O ring seals.
- Thread starter
- #3
Alweeja
Member
Goo
- Thread starter
- #4
Alweeja
Member
Nothing??
- Moderator
- #5
- Joined
- Nov 9, 2000
- Messages
- 7,559
- Location
- Edgerton, Ohio, United States
- Corvette
- 1959 black 270hp (9/2/69), 1981 Beige L81(10/20/80)
I put AC Delco rebuilts on the '81. They are stainless sleeved and use stock type seals. I got them from Summit. They have been on there for several years with no problem. I don't have any experience with o-ring sealed calipers, but people seem to like them.
Lone Star Calipers seems to have the best reputation for quality. I would probably go there if I had to do it again. Put 65-82 Corvette in the search and you will get everything for your car. They have lip seal and o-ring calipers
Tom
Lone Star Calipers seems to have the best reputation for quality. I would probably go there if I had to do it again. Put 65-82 Corvette in the search and you will get everything for your car. They have lip seal and o-ring calipers
Tom
Similar threads
Corvette Forums
Supporting Vendors
Dealers:
