Carb Gasket/Spacer

[72-LT1]

I just got my carb back from Holley, and was wondering what the correct gasket is?. They sent me a thin normal gasket with the rebuild.

Before pulling my carb it had a thick flange that looks original but no gasket.

It can up somewhere else that the Holley 108-12 flange gasket would work, is this correct? I looked on the vendor sites but didn't see anything else. Would I use the flange gasket with the thin gasket that Holley sent?


Thanks

 

[72-LT1]

Called Holley and they said use the 108-12 W/O other thin gasket. So I guess Ill get that, and keep the old thick gasket since it still seems to work OK.

Thanks All

 

[knish71]

72-LT1

Go to http://docrebuild.com/dr-r-web/CARB-GASKET.HTML

they have the correct gasket.

Rob

Called Holley and they said use the 108-12 W/O other thin gasket. So I guess Ill get that, and keep the old thick gasket since it still seems to work OK.

Thanks All