Welcome to the Corvette Forums at the Corvette Action Center!

Convertible Frame Supports

  • Thread starter Thread starter aqua94
  • Start date Start date
A

aqua94

Guest
I have noticed a difference in the way my 1994 coupe handles and drives without the removeable top on. I have been told the convertible model has extra frame supports/braces underneath the car. I was just wondering several things. One, can these extra supports be installed on a coupe? Two, has anybody done this modification? Three, were the mods worth the effort? I hope somebody can help me out here. Thanks very much in advance!
 
Yes the X-brace can be installed on coupes - it adds an extra 150 pounds to the car and lowers the ground clearance an inch or more.

It would cut down on the flex, especially with the targa roof off.
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom