Welcome to the Corvette Forums at the Corvette Action Center!

Dash Gauges Bulb Replacement - Easy Way?

T

taylorjs

Guest
On my 72, the Tach has one bulb burned out. Whats the best way to replace it? From underneiht or do I need to pull off the dash pad (those seem to be hard to get past the side winshield posts too)
 
Crack!!!

If you don't drop the steering column, you could risk breaking the driver's gauge panel. If you can't contort your way underneath(almost impossible with the seat installed), you might want to consider removing the middle gauge panel. From this vantage point, you should be able to reach behind the tach without too much interference. While you are there, replace all the bulbs. You'll thank yourself, later.--Bullitt
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom