Welcome to the Corvette Forums at the Corvette Action Center!

dash lights?

rowingone

Well-known member
Joined
Dec 2, 2003
Messages
221
Location
colorado
Corvette
1964 conv
OK so I got all the gauge lights to work . . but the bottom inner portion of my dash was cut away at some point by bubba . . . where and how do the lights for the knobs attach to the dash? I"m assuming there were holes in the lower, inner dash that these pushed into .. cant find a picture in any of my books . . help!? Its a 64.
 
Also where does the heater control lamp attach . . .the wire is too short to reach the back of the clock which is where it looks like it should attach? thanks!
 
The knobs in the lower area of the cluster don't have lights - only the lighter and the ignition switch. The "torpedo" lamp that illuminates the heater control bezels slides into a slot in the bottom of the clock receptacle, and won't work unless the clock is installed and connected - it gets its ground from contact between the upturned end of the lamp retainer and the O.D. of the metal outer clock case. :)

HtrBezLamp700.jpg


:beer
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom