E4ME Idle air valve problem

[Peer81]

Hello everybody,

When disassembling my carb I saw the idle air valve isn't perfect straight but has a small curve in it (in the small stalk at the lower part). To adjust the idle air valve this should be straight. So my question is, who has a perfect Idle air valve and wants to sell it to me. ;help

btw. when you look at the idle air valve it is made out of 2 pieces, I only need the lower part but the entire valve is also no problem of course

Groeten Peter

 

[jj_long81]

i googled it months ago and was looking for info on that carb for my car. i found the replacement parts and some places that will fix warped air horns and base plates. ill take a look and see if i can find the site i was viewing. post a pic of the part and maybe someone will have an extra used portion of the part you need. good luck.

see ya.:cool

 

[Peer81]

Thanks for the info
I also contacted Cliff (maybe the site you're talking about) and he has some spare E4ME's so he is looking if he has a good Idle air valve

Groeten Peter

 

[Peer81]

Cliff send me one for free, talking about service!
I only have to wait on my pin vise so I can continue with the carb. Sure like to hear her run again.

Groeten Peter

 

[Sensei]