Welcome to the Corvette Forums at the Corvette Action Center!

Front License Insert Removal

2

2kcoupe

Guest
Well it's balmy 25 degrees here in Boston, but I know the good weather is around the corner. I was cleaning up my car, when I realized I need to put on
a front license plate. I couldn't figure out if the license plate insert snapped in
or what. Does anyone know if the license plate insert is screwed in or snapped in. I didn't want to force it. Thanks for looking.
 
Welcome to the CAC!

I believe that there are two small screws in the bottom of the opening that have to be removed. I have always run a plate, so I am not 100% sure. If I remember correctly, you can place a small screwdriver in the gap to access the screws. Somebody else will chime in shortly if this is wrong.
 
You are right Darth. There are 2 Phillip screws at the bottom. Kind of a pain in the rear to get to them. At least they were for me. :beer
 
Thought they were on each side..left and right. Could be wrong but know there are two screws for sure.
 
The screws are at the bottom on each side, at least on the "99. Don't know if the '00 is different.:w
 
Anyone have a White one they would sell ?

Thanks,

-Garry
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom