Front Spoiler?

[A1990]

I recently purchased the Callaway AeroBody kit for my ZR-1. My question is do you put a spoiler under the front bummer? Stock? Custom? None?

I can never tell from the pictures I've seen and I knew this is the place to get the correct answer!

thanks!!

 

[shopview]

Spolier and it is the tall version....Call Joann @ Callaway and she can send you the right one (cheaper than GM)...its not the 1990 one from Ecklers. The car will overheat without it as it directs the airflow into the radiator.

 

[A1990]

Thanks for the info. I will call Joann on Monday. I am also curious as to how the insides of the door look. where the body kit meets the door.

 

[Jeroenvgfn]

I recently purchased the Callaway AeroBody kit for my ZR-1. My question is do you put a spoiler under the front bummer? Stock? Custom? None?

I can never tell from the pictures I've seen and I knew this is the place to get the correct answer!

thanks!!

Welcome to the CAC ,

tell us more about the ZR-1 and ofcourse PICS !!

 

[*89x2*]

I recently purchased the Callaway AeroBody kit for my ZR-1. My question is do you put a spoiler under the front bummer? Stock? Custom? None?

I can never tell from the pictures I've seen and I knew this is the place to get the correct answer!

thanks!!

The cars use the stock center section of the (factory) spoilers.

My 1993 (CL1) is different in design than the deep spoiler of my B2K. When I replaced the B2K spolier, it used the center section (only!) of the long air dam and is referenced under GM's part database for B2K's however, since your car is a LT5 car (right??), just use the center piece of your original spoiler.

- I hope this helps.

re: the doors, EricVonHa had a thread about that 2 years ago when he was asking what might be a similar question. If a search yurns up nothing, I am certain one of us can take a picture of the area you are asking about - Just inquire

Hope to see some pics of your progress

 

[A1990]

I have several pics I will post next week. Could someone here open your door and take a picture looking at the door edge. Where the kit would meet the original door panel. Are these glassed together? Eric would probably know...

TIA

 

[*89x2*]

...they were not "glassed" smooth.

Maybe if Eric reads this, he can share his experiences w/ taking his car apart.

 

[A1990]

A couple pics here:

 

[*89x2*]

...here is the thread I was thinking about regarding AeroBody questions: http://www.corvetteactioncenter.com/forums/showthread.php?t=49111

 

[Brangeta]

I spy... with my little eye... a "big block" hood!

 

[A1990]

...here is the thread I was thinking about regarding AeroBody questions: http://www.corvetteactioncenter.com/forums/showthread.php?t=49111

That was the one I found too. Thanks

thanks for fixing my earlier post too!!

 

[A1990]

I found some other post by Eric, but I couldn't get some of the pictures to show up.

Looking for pictures of the back of the door looking at the edge of the door piece, also any pictures of the inside of the door jam where the rocker meets the back small fender piece. That could be from either view (the back tire looking forward and/or inside the door frame looking back.

Also, what is the mix of AeroBody cars that painted the rub strip black vs. body colored?

Just looking for some feedback on that.

thanks

 

[*89x2*]

I found some other post by Eric, but I couldn't get some of the pictures to show up.

Looking for pictures of the back of the door looking at the edge of the door piece, also any pictures of the inside of the door jam where the rocker meets the back small fender piece. That could be from either view (the back tire looking forward and/or inside the door frame looking back.

Also, what is the mix of AeroBody cars that painted the rub strip black vs. body colored?

Just looking for some feedback on that.

thanks

Here are a couple images I grabbed from in the garage real quick - If you would like any more, feel free to ask

- I hope this helps

 

[A1990]

Chris, thanks so much for those pics! those answer alot of my questions!

Could I bother you for one more picture? One from looking forward from behind the rear wheel. looking at the rocker panel were it meets the wheel well.

the opposite of picture #2.

 

[*89x2*]

Chris, thanks so much for those pics! those answer alot of my questions!

Could I bother you for one more picture? One from looking forward from behind the rear wheel. looking at the rocker panel were it meets the wheel well.

the opposite of picture #2.

Hey, it's no bother!

The other pic will have to keep 'till Monday though - it is STORMING pretty bad tonite :crazy

 

[A1990]

No worries! I'll keep you guys posted too as things go along. I am painting the car the new corvette color Atomic Orange Metallic Tintcoat. It is an awesome color.

Trying to decide what to do with the emblem in the nose too. Unfortunetly I don't have a Callaway one.

Suggestions?

I did notice on the thread where there were lots of Callaway pictures that some did mount the the two side pieces of the spoiler. BTW the middle spoiler piece was included with the kit. My installer just located it

 

[*89x2*]

...o.k., we didn't wash away, but the Beltway DID :eek

Anyways, here is a shot of the panel as you asked :cool

...and one of the river flowing through my yard :eek

...here are some more pics - of the weather :eek

 

[Brangeta]

Wow! We rarely ever have floods like that here in Dallas. In some of the low points in the DFW area though, some flooding happens, but no rivers!

 

[kruzmisl]

Atomic Aerobody! I think that will be sharp as well, good call!

 

[TurboLuigi]

geez.... rain, rain, rain, when will it go away...

Stay dry

-Luigi

:cool