FS: Keyless Entry Fobs

[yellow_2002_germany]

I have for sale 3 pairs of keyless entry fobs (1x #1 and 1x #2). These ARE NOT the passive fobs. These fobs work on 2000-2004 Corvettes. The part numbers are: #1...25695954 and #2...25695955. I will only sell them in pairs. The are brand new, not used.

$75 each pair postpaid.

 

[yellow_2002_germany]

These are still for sale. I currently plan to be at Bloomington Gold on Saturday, 27 June. If you are interested please send a PM and I will give you my cell number so that you may get in touch with me on Saturday.

 

[jj2k]

I ordered a replacement for mine the day before you posted this. It hasn't arrived yet. But, if it doesn't work or something, I'll be checking in to see about getting a pair. My dang timing was all off on this deal. I paid the same price for 1 that you are selling the pair for. Plus more for shipping. Oh well, thems the breaks.

 

[yellow_2002_germany]

I still have all 3 pairs available. I also found a used #1 while I was poking around.

I could probably let the used one go for $25 postpaid.

Even though the fobs are new, I did take a couple of them apart to check the state of the battery. They will show small marks where the halves had to be pried apart. The batteries checked at ~3.3VDC. Right on the mark with no corrosion.

 

[Tigershark_11]

What are passive FOBS vs none passive FOBS? I may be looking for remotes for my 2000 corvette. How do you program them to the car?

 

[yellow_2002_germany]

What are passive FOBS vs none passive FOBS? I may be looking for remotes for my 2000 corvette. How do you program them to the car?

Passive fobs have a switch at the bottom of the face to switch between passive and active mode. In passive mode the fob emits a signal the car senses and then unlocks your car when you get close enough. In active mode there is no signal from the fob until you press the unlock button. The passive fobs are only good with 1997-1999 corvettes.

As far as reprogramming I can't remember since it has been over 2 years since I sold my 2002. However, the procedure is in the owner's manual.

 

[jj2k]

What are passive FOBS vs none passive FOBS? I may be looking for remotes for my 2000 corvette. How do you program them to the car?

Real simple process. From the owners manual:

To match transmitters to your vehicle:
1. Turn the ignition key to ON.
2. Clear any warning messages on the Driver
Information Center (DIC) by pressing the
RESET button.
3. Press the OPTIONS button on the DIC several times
until the blank page is displayed, then press and hold
the RESET button for two seconds.
4. When the message FOB TRAINING is displayed,
push the RESET button once. The message
HOLD LK + UNLK 1ST FOB in the DIC
will be displayed.
5. Press and hold the LOCK and UNLOCK buttons on
the transmitter simultaneously for 15 seconds.
6. When a transmitter is learned (matched), the DIC
will display FOB LEARNED and then prompt you
to learn the next transmitter.
7. Repeat Steps 5 and 6 for each additional transmitter.​

8. Remove the key from the ignition.

JJ

 

[Tigershark_11]

Thanks JJ this is very helpfull.