Fuel Pressure Gage Hose

[mailmaninvette]

zzzzz

 

[bczee]

Have you checked to see if Kent Moore makes a replacement for it. ?

If you check on a Hose and Tubing Shop, they can usually make whay you need. They can make up any kind of hoses or tubing, Brakes, A/C, fuel Line, etc. But I think it will cost you more than the original unit. I pickup a cheap test one at Harbor Frieght for $10.00, so your idea of using a hose off a a cheap gauge would be the cheaps and maybe the easiest to do.

 

[Hib Halverson]

IZ(snip)
buy a cheap gage
and use the hose off it . I need some ideas of where
to look . The gage I have is a older Kent Moore J 34730 .


Roy

Wrong thing to do. A cheap gauge will have cheap hose. The last thing you want on a fuel pressure gage for a port fuel motor is cheap hose.

I'd take the gauge to a hose/fitting vendor and have them make a new hose, equivalent in quality to the hose K-M originally installed on the tool.