Welcome to the Corvette Forums at the Corvette Action Center!

FYI Air Conditioning

  • Thread starter Thread starter Eagle85C4
  • Start date Start date
E

Eagle85C4

Guest
Air conditioning time is just around the corner. And folks are going to need it fixed. Before you uncap a port on your car a/c unit consider the following....part 609 of the Clean Air Act. It is considered a felony for anyone other then a certified technician to effect any repair to a vehicle air conditioning system. IN some cases the fines are 10,000.00 a day per incident. And it will be soon that unless you are certified you will not be able to buy even 134A...

EPA web site

http://www.epa.gov/ozone/title6/609/technicians/609certs.html

Section 609 covers technician certification in the motor vehicle sector only. Becoming certified allows you to: (1) perform refrigerant servicing of vehicles with R-12, R-134a, or blend refrigerants; and (2) purchase R-12 and ozone-depleting blend substitutes for R-12 (right now, all blends are ozone-depleting) .

Although you have to be certified to perform refrigerant servicing of vehicles equipped with R-134a, currently, you do not have to be certified to purchase R-134a. EPA, however, issued on June 11, 1998 a proposed regulation that would restrict the sale of R-134a to certified technicians. If you become certified now, your certification will allow you to purchase R-134a if a sales restriction is instituted in the future.


To become certified go to www.qwik.com Mainstream Engineering...you can download the manual for the 609 test then for 20.00 take an open book test and if you pass (chuckle...)you get a temp card immediately and the plastic one in the mail. This certifies you to purchase freon and work on motor vehicle air conditioners legally as well as charge all your friends to fill theirs...
 
Len... A lot has changed since you installed the A/C on the Ark....


;LOL ;LOL ;LOL ;LOL ;LOL
 
nyernga said:
hmmmmm it wasn't open book when I took it........:L:L

what the heck, a MAC card is a MAC card right?


Len

Ditto....I'm still certified and use it all the time. I work on reefer units and one of the guys that took the MAC test got a 86:duh and it was an open book mail in test. 8yrs ago.
 
The test there is open book on line....results are immediate....and I could not believe how easy it was....

Of course this is for MVAC only...for stationary you need part 608
 
Do I need part 608 to purchase R-12? or is 609 enough?



Eagle85C4 said:
The test there is open book on line....results are immediate....and I could not believe how easy it was....

Of course this is for MVAC only...for stationary you need part 608
 
Nevermind, 609 is for automotive. I will be taking the test in the morning. It will be nice to legally buy R-12 now.

The way these tests look anyone with a gradeschool ed can pass.

Gotta love government
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom