Welcome to the Corvette Forums at the Corvette Action Center!

Gauges went berserk!

Larry's Yellow Rdstr

Well-known member
Joined
Oct 19, 2002
Messages
304
Location
Redlands, Ca.
Corvette
05 black cpe-Porsche GT3
Drove from my house to a local coffee shop this am. Car runs great. Came out an hour later and started the 2001 Conv. Every warning light , buzzer, bell, whistle goes off. All the gauges are in-op except the speedo and ammeter. The information center is scrooling all kinds of ominous warnings, but there is nothing wrong with the car.
Suggestions?!
This is my first post. The car has 11,000 miles and is under warranty.
 
Hi there,
I would ask that you retreive codes from all modules, and please post them here.
Looking at your DIC
Start the car, clear the screen, and push and hold the #4 button. Then, push the #1 button 4 times. This will put you into diagnostics mode.
All history codes will show for 50 ignition cycles, so something should be there.
Please also note which module the codes came from.
They will come quick, so have a pen and paper there when you do this.
I am sure we can assist somewhat in your condition, all thebest, c4c5:hb
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom