Getting Conflicting Informaion Re: Brake Push Rod Adustmet

[Jon S]

My question is very simple - are the brake push rods on our 1981 Corvettes adjustable i.e. capable of being lengthened? If so, is there a threaded end on the MC side or is it a brake pedal side adjustment?

 

[6880 Mike]

I believe the pushrod is adjustable. If memory serves, the assembly instruction manual (AIM) has a blurb about the factory length setting on the booster installation page. I will not be able to check the AIM until this evening.

 

[Jon S]

I believe the pushrod is adjustable. If memory serves, the assembly instruction manual (AIM) has a blurb about the factory length setting on the booster installation page. I will not be able to check the AIM until this evening.

Thanks! Appreciate it.

 

[6880 Mike]

Apparently not adjustable. I checked my 79-82 AIMs; all have essentially the same AIM diagram and none show any type of assembly line adjustment.

 

[Jon S]

Apparently not adjustable. I checked my 79-82 AIMs; all have essentially the same AIM diagram and none show any type of assembly line adjustment.

Figures. Thanks for checking!

Jon