Welcome to the Corvette Forums at the Corvette Action Center!

Heat/AC controls

  • Thread starter Thread starter sumoboy
  • Start date Start date
S

sumoboy

Guest
I have a vacuum leak in the vent control manifold for heat. Will others fit the 84'? (Full size chevy or others) I don't know if the dash controls are the same fit .;help
 
What style A/C controller ( auto or manual)

and the control head doesn't actually do any vac routing.. another box under the dash does that for the C-68


Need more details

Vig!
 
It's a manual one. The air just comes out of the vents,no defrost or floor. If I run vacuum to the lines for the defrost or the floor they both work. There is a vacuum manifold on the slide control.
ACDelco Part # 15-71414 C49
 
Ahhh the dreaded switch!

But back there.. is the vac line coupling as well maybe...just maybe your leaking at the line running behind the dash & not the switch!

Vig!
 
Vig...

Remember the source is off the plenum, and then down the firewall into the dash....plenty of places for a break....plus after a while that tubing gets brittle. And also the check valve is a possibility
 
Yes Eagle.... you are 100% correct

I assumed!

I thought the "Hissing" was com the dash.. that's why I went that way...

OOPS

Thanks again Eagle!

Vig!
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom