ZRGator
Gone but not forgotten
- Joined
- Aug 26, 2004
- Messages
- 322
- Location
- West Friendship, MD
- Corvette
- 1993 40th ZR1, 1967 Red 427/400 coupe
Guys, here's what happened. I have an Optima battery in my 93 ZR1. The top of the pos post was hitting the bottom of the metal mounting tray for the CC gear and the previous owner had put the handle for the battery between the top of the post and the metal. I sawed off the pos post today. I'm in Stanley, VA (just outside Luray). As I was finishing, I heard the doors lock and suddenly everything went dead! Put the key in the ignition, nothing! Not even the buzz for the door open warning. No lights, horn, nothing. Turn the key and more nothing. I checked the battery with a charger, it says 100%. I pulled every fuse from all three of the fuse panels and alll fuses are good. I disconnected the battery and reconnected and still nothing.
Is there an in line fuse somewhere that I can't locate? My service manuals are home (of course). And while I'm at it, how do you remove the panel on the side of the car to remove the battery? I located the bolt on the right top, the three torqs screws in the wheel well and the bolt that I can't get to is on the bottom...that's the one I can't figure how to get out.
But mainly and of most importance, why is the car completely dead?
Is there an in line fuse somewhere that I can't locate? My service manuals are home (of course). And while I'm at it, how do you remove the panel on the side of the car to remove the battery? I located the bolt on the right top, the three torqs screws in the wheel well and the bolt that I can't get to is on the bottom...that's the one I can't figure how to get out.
But mainly and of most importance, why is the car completely dead?