S
SurfnSun
Guest
Did you ever order those polished compressor pipes from Callaway?
- Joined
- Mar 18, 2002
- Messages
- 934
- Location
- Westchester,New York
- Corvette
- 1989 Callaway Twin Turbo Aerobody Coupe
Hey Josh
No I did not . It turned out that my pipe was fine and did not need to be replaced. How is your car making out? I hope all works out for you . And that the bill isn't to HEFTY. Sounds like alot of time on the dyno.
No I did not . It turned out that my pipe was fine and did not need to be replaced. How is your car making out? I hope all works out for you . And that the bill isn't to HEFTY. Sounds like alot of time on the dyno.
- Thread starter
- #3
S
SurfnSun
Guest
Ok, I was just wondering what the price was on those.
Well we're still working on the lean out issue. Hopefully narrowing it down. I think the supplemental injectors are next...have been trying to figure out how huge they are. With all my sources combined I know them to be between 75-80lb/hr injectors!!!! Im thinking about ordering a couple of 80s and throwing them in. Id rather be rich and take a power loss to improve overall safety.
Besides if I do anymore mods, Im gonna be needing the extra fuel anyway
I had a job interview in Atlanta this last week, if it all works out I should be able to keep the car
Anyway back to the original point....Id like to get an extra set of compressor tubes and maybe put BOVs on them.
Well we're still working on the lean out issue. Hopefully narrowing it down. I think the supplemental injectors are next...have been trying to figure out how huge they are. With all my sources combined I know them to be between 75-80lb/hr injectors!!!! Im thinking about ordering a couple of 80s and throwing them in. Id rather be rich and take a power loss to improve overall safety.
Besides if I do anymore mods, Im gonna be needing the extra fuel anyway
I had a job interview in Atlanta this last week, if it all works out I should be able to keep the car
Anyway back to the original point....Id like to get an extra set of compressor tubes and maybe put BOVs on them.
*89x2*
Well-known member
SurfnSun said:I had a job interview in Atlanta this last week, if it all works out I should be able to keep the car
Awesome news Josh - then just add aerobody & you have what you wanted in the start
Keep us posted on your good fortune
- Thread starter
- #5
S
SurfnSun
Guest
Keep us posted on your good fortune
Good fortune is having been able to own this magnificent car. A miracle will be the ability to keep it
Im trying not to be overly optimistic so that Im not devastated if I don't get it.
*89x2*
Well-known member
SurfnSun said:
true, so very true
Similar threads
Corvette Forums
Supporting Vendors
Dealers:
