Welcome to the Corvette Forums at the Corvette Action Center!

I finally got started

SteveL

Active member
Joined
Jun 24, 2003
Messages
33
Location
RI
Corvette
1981 coupe
I posted a while back on how to get started on fixing my 81 and got a lot of help.Now I got the engine, trans and radiator out .I am in the proccess of cleaning and painting the frame with por 15 I am also rebuilding the front suspension with new poly bushings,Tie rods,ball joints , new springs and calipers. Once the fronts done I'll move on to the rear end. This por 15 is amazing stuff.A couple of things I've learned is once it dries on something(like your hands) it doesn't come off also if you paint a piece don't put it down on something to dry, hang it instead.These are just a couple of dumb things I've learned.
Steve
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom