Welcome to the Corvette Forums at the Corvette Action Center!

Ignition wire routing in no radio car

KTM

Well-known member
Joined
Dec 22, 2001
Messages
69
Location
Finland
Corvette
1967 Convertible
Does anyone of you have pictures or knolege of ignition wire routing in no radio car. My ´65 coupe has come without radio from factory and now I need to know what way they did route ignition wires. Were wires put same way like radio cars, but without shielding or were the wires routed over the engine as pasanger cars?
 
Joined
Jan 1, 2002
Messages
7,246
Location
Washington, Michigan
Corvette
'67 Marina Blue Convertible
The same plug wires were used, and they were routed exactly the same way, except no-radio cars didn't use the lower "banana" shields - just bend-over clips at the pan rail to retain the wires for the front two cylinders on each side. Non-radio plug wire routing is shown in UPC 6 in the A.I.M.
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Parts/Accessories:

Vetteskins

Advertise with the Corvette Action Center!

Double Your Chances!

Partners

Top Bottom