intake

[aerie1761]

I went to edelbrock they recommended the performer 2101 with a 1406 carb They have a nice polished intake more money of course.I have a 81 vette and I want to either change the distributor to a high performance one or can I revamp mine but I still want it to work with my original tach. Can this be done and is this a good setup for my 350 ci Thanks

 

[1BAD80]

Yes, it can be done with the MSD unit.
I prefer the Weigan Stealth intake with a Holly 3310 750 with vacuum secondaries, and Mallory distributor, its just a matter of choice and what works for you. I put the same setup on my brothers 81.

 

[81 Corvette]

i just ordered the RPM Air Gap. Edelbrocks web site says it doesn't fit a stock corvette hood, but i did some searches and feel confident i can make it fit with a drop down filter.

 

[aerie1761]

Intake ,Dist

Thanks for the replys I think Im going to go with the #21011 polished performer intake with the thunder avs carb 650 cfm or 800 cfm and the MSD pro billet HEI #8365 I will let you know what happens. Any other comments would be appreiciated.

 

[clar2001]

Carefull with the drop down filter base mine hit the the fuel push rod on the top of the carb.
I ended up installing a L88 Hood I would like to do cold air intake from the front of the car just haven,t seen a filter set up, maby a mod from a camero would work.

Edelbrock 2101 intake & Edelbrock Q-Jet 1903 next steep is the Mallory Dist.