Just bought this intake.

[Mad-Mic]

for 500 bucks used

Tuned Port Injection System

Baseplate Edelbrock EDE3681 Paid $336.

52mm Throttle Body SLP2200 Paid $359.

Intake Runners SLP20004 Paid $229.

Injectors 21 lb Rochesters,

Sensors
mass air,
intake air temp,
throttle position,
coolant temperature.

this is all going on my Z82 Z/28 with 400 sbc, L98 heads, hefty cam, T56 6 speed and 9 bolt with 3.73 posi

 

[*89x2*]

...I believe your injectors will be massively overworked :eek

21lbs... YIKES! :eek

 

[thirdtimevetteowner]

Mic,
I should be so lucky If you hear of any morde deals like that, and don't need em, give me a yell, huh?

Richbutnotrich

 

[Mad-Mic]

...I believe your injectors will be massively overworked :eek

21lbs... YIKES! :eek

Chris thats just the injectors that came with the TPI.....lol i got 24 lb'ers ready for action

 

[Mad-Mic]

Mic,
I should be so lucky If you hear of any morde deals like that, and don't need em, give me a yell, huh?

Richbutnotrich

gotta scour the forums! not just vette forums but 3rd gen forums

i got another set of runners but i haven't paid the car off on a previous deal yet. (friend of mine) when i get it ready for the swap into my Z i will be letting a set of SLP runners, base manifold, base plenum go in a few months.

 

[*89x2*]

Chris thats just the injectors that came with the TPI.....lol i got 24 lb'ers ready for action

Whew! Time to sell those on the f-body forums then

Speaking of selling, I sold my 6.3L GTA a few weeks ago

 

[Mad-Mic]

Whew! Time to sell those on the f-body forums then

Speaking of selling, I sold my 6.3L GTA a few weeks ago

6.3 Litre? big block car? i knew you had a GTA but didn't know it was a big'un

 

[Moonunit 451]

for 500 bucks used

Tuned Port Injection System

Baseplate Edelbrock EDE3681 Paid $336.

52mm Throttle Body SLP2200 Paid $359.

Intake Runners SLP20004 Paid $229.

Injectors 21 lb Rochesters,

Sensors
mass air,
intake air temp,
throttle position,
coolant temperature.

this is all going on my Z82 Z/28 with 400 sbc, L98 heads, hefty cam, T56 6 speed and 9 bolt with 3.73 posi

Mic! You're gettin' as bad as I was --- Worse even Now it's time for ME to ask, How many intakes you got anyway? :L

 

[*89x2*]

6.3 Litre? big block car? i knew you had a GTA but didn't know it was a big'un

Mic, see this thread: http://www.corvetteactioncenter.com/forums/showthread.php?t=62126

 

[thirdtimevetteowner]

Sounds good, where abouts are you from? Anywhere close to PA, I hope? I'm dying to get into this engine.

 

[Ken]

Hey Mic, if you get to the point where you'll need 36#-er's, let me know I'll give you a break on a set.

Take a look at my Stuff For Sale page and see if there's anything else you might need.

Chris thats just the injectors that came with the TPI.....lol i got 24 lb'ers ready for action

 

[Mad-Mic]

Mic, see this thread: http://www.corvetteactioncenter.com/forums/showthread.php?t=62126

*insert drooly smiley here*

 

[Mad-Mic]

Mic! You're gettin' as bad as I was --- Worse even Now it's time for ME to ask, How many intakes you got anyway? :L

do you really want to know?.........lmao

include whats on my cars now......

1 stock TPI
1 stock base/plenum/SLP runners
1 large mouth base/ported plenum/SLP runners
1 LT1 intake

1 88 roller short block
1 400 stroker w/ stock heads
1 70's 388 roller stroker short block
1 stock 350 thats in my vette now
1 305 CFI with mild mods in my Z/28 now

2 700R4's sitting plus 1 in my vette = 3 700R4's
1 T56 6 speed with LT4 pressure plate/mccloud clutch
1 200 metric A3
1 2600 stall getting restalled and rebuilt to 3200 for 180 bucks

1 9 bolt GM rear with 3.73
1 10 bolt GM rear with 3.42's all richmond guts

2 extra sets of corvette rims now only 1 set cause i gave a set to Rich a few days ago
1 set of 16" iroc rims
1 set of 16" GTA rims
1 stock set of C1500 truck tires

1 82 Z/28
1 85 TA
1 87 Vette
1 97 Chevy 1500 4.3 vortech optional towing package

and a bunch of little stuff.
2 sets of L98 heads 1 of them are iron and the other Dport 113's
harmonic balancer
24 lbs injectors
52 mm TB with sensors
set of comp 996 valve springs
ZZ409 cam

and i'm sure a bunch of other parts and accessories in my basement that i can't see or just forgot.

heck i think i still have a set of big block heads and valve covers from my 72 SS Chevelle with a 396 i used to have :L

but this is most of what parts and cars/trucks/boat i have at my house now.

thanks for reminding me

 

[Mad-Mic]

Sounds good, where abouts are you from? Anywhere close to PA, I hope? I'm dying to get into this engine.

i'm in the baltimore area.

 

[Mad-Mic]

Hey Mic, if you get to the point where you'll need 36#-er's, let me know I'll give you a break on a set.

Take a look at my Stuff For Sale page and see if there's anything else you might need.

ken look above and you'll see i have enough parts to build a few cars. need any?

 

[Ken]

Well, excuuuuuuse me! :L

 

[WhalePirot]

i have enough parts to build a few cars. need any?

Looking. I have a partially built F-100 that needs a motive source and a newer powertrain, methinks. Chevy is MY solution.