Looking For:

[saxybill1]

What I need is this: It is a steel pipe, about 3/8's opening that runs to the intake manifol, just under the distribuor and next to the egr pipe. It has a brass fitting on one end that screws into the maniflod. The other end goes to a rubber hose. I gues the pipe itself is about 6-8 inches long. The brass fitting going into the intake contains another brass fitting into it, which is where the steel pipe works from. I have no idea what this is called; however, I broke mine while installing the intake back in.

Does anyone have this pipe or know of where I can get it? I've searched long enough and now must turn to you folks for help. Please let me know should you have an extra one of these hanging around and I'd be happy to purchase it from you.

Thanks,
Bill

 

[oldace84]

Sorry, but I wonder why?

 

[taegdh]

Is this attached to the EGR or PCV systems?
Or could it be that you are looking for a fuel pipe which goes to the cold start fuel injector?
Another thought is what goes through this pipe?

You might be going down to your local plumbing supply house and dong some comparisons of threads and composition.

Lots of Luck