Welcome to the Corvette Forums at the Corvette Action Center!

Main Door Seal Replacement

EOLIVER

Well-known member
Joined
Dec 14, 2003
Messages
116
Location
SAN DIEGO, CA
Corvette
1989 DARK BLU METALIC SIX SPEED CONV
I have a 1987 coupe and I'm looking to replace the main door seals. My question would be whether it's necessary to remove the door panels to accomplish this job?
 
I noticed you were not getting a response in the restoration forum so I moved this post to the C4 Forum.

Tom
 
not completely but you do have to drop it down a good bit to access the retainers

Len:w
 
I replaced these on my 1987 a few years back (when I still owned it). If I recall, you just need to remove those screws on both sides of the top, and then it is clipped in with plastic clips and weatherstripping glue. I did not remove the door panels. The door stripping is pretty easy to replace. The window seal, though, does require removing the panel. I assume you mean the big piece that runs around 3/4 of the door?
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom