mi vette 91 restoration proyect!!

[jgr91vette]

before n' after

here are the pics before and after you asked jim...
BEFORE

AFTER

SORRY for the absence of pics from the engine but i dont have new ones and the vette its on the workshop getting my tranny service donne and getting new pieces instaled like my new headers, my trans go and trans cooler.
the interior stills the same just with new custom floormats done by myself.

 

[chuck121566]

Nice job on the paint job....too many vettes out there have fallen victim to projects started and not finished. Congratulations!!!

 

[norwegianvette]

That looks grate. Good job. Any pictures ov the new stereo you mentioned and did you take pictures removing the front bumper. I would like to replace my parkin/indicator lenses on my 93 but i am worried about removing the bumper. Live in Norway and had to drill a hole in the original lights to add a white light bulb for parking. Some stupid law in norway say no no to amber parking lights in front. Any information you might have on that bumperbusiness would be good.

Regards,
Steve

 

[norwegianvette]

Is the front fastened on the sides only or is it a major job to remove it. Needs access to the indicator lenses on my 1993 and i'm not shure how to get to the problem.

Thanks from Norway

 

[jgr91vette]

front facia

hi steve , yep the front facia is fastened on the sides but there two more srews under the facia that holds the facia to the chassis to give it extra strengh, and there are other 8 (aprox)screws on the facia near the hood, this ones are a real pain, because you have
to remove the hood to get them off. then you have to play a lil bit with the facia by flexing it to get it off the its support, as a recomendation ,remove the facia support only if its necessary cause its a problem to allign it well just the same problem when removing the hood, but if you want to remove the support there are 4 screws under the hood to get it loose. you will need some extra help to align everything back , and alot of pacience this job can be a little tedious but its worth it.its a real pleasant job to do it urserf.
sorry i dont have any pictures of this job but i hope this info will help you steve and my apologies for answering this late. if you get any trouble dont doubt to ask. good luck