Welcome to the Corvette Forums at the Corvette Action Center!

Now ! A Window Adjustment

  • Thread starter Thread starter CAJUN C4
  • Start date Start date
C

CAJUN C4

Guest
Finished, (Almost) .

Installed my "A" Pillar Wilcox Weatherstriping Sunday and Reccieved my Repaired Top from Melrose.

Now,Looks like both Windows need to come forward slightly.
How Difficult is this adjustment and probably will take 2 people?
 
Hey Dennis,

Mark the present aligment, once it loosed hard to re align. Its not a two man job but patience needed.
My glasses are aftermarket i have been working on proper aligment for 4 days :(

But with the original parts you should be fine. Just take your time.

www.australiancorvettes.com/pages/c4techtips.htm

this guy has a step by step explanation. I hope it helps a bit.:beer

Does your glass in line ( front and rear has same height). If not and if the front is little higher than rear it will look like need to com FWD. You can re adjust front height adjuster part ( its a plastic part and prone to worn out easy).
 
Had a similar problem with my wifes car.

FSM states just what acme-corvette said mark the factory locations and make adjustments from there. About the most difficult thing is getting the darn door panel off. Hidden screws!
One man job wear gloves lots of shape edges.

Front adjuster still available from the dealer just bought one $13.00 and change. You will need a special wrench or a small pair of vice grips to replace it though. It's bolted thru the glass.
 
infact you dont need to remove lock panel. There are holes in the panel, both mid and top position you can access to the 10mm bolts that holds the glass.:beer
 

Corvette Forums

Not a member of the Corvette Action Center?  Join now!  It's free!

Help support the Corvette Action Center!

Supporting Vendors

Dealers:

MacMulkin Chevrolet - The Second Largest Corvette Dealer in the Country!

Advertise with the Corvette Action Center!

Double Your Chances!

Our Partners

Back
Top Bottom