Poly Bushing install

[Chiller]

I purchased sway barsW w/poly bushings for my vette My question is how do you install the bushings on the sway bar? The plastic looks harder and if I pry the gap(in the bushing) open, it looks like there is a potential for the bushing to crack/break in half. (Marine Corps testosterone can break damn near anything!) Seriously, do I need to do anything special to the bushings to get them on the sway bars? Thanks,
Chiller

 

[mason1968]

No just open them up and slip them on. The poly bushing will have enough give. One thing you may want to do is add a little greese to the bushing between the bushings bore and the OD of the sway bar. This will help in reducing the "squeke" they poly bushing may have.